Wireless network

A wireless network is a computer network that uses wireless data connections between network nodes.^[1] Wireless networking allows homes, telecommunications networks, and business installations to avoid the costly process of introducing cables into a building, or as a connection between various equipment locations.^[2] Admin telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model network structure.^[3]

Examples of wireless networks include cell phone networks, wireless local area networks (WLANs), wireless sensor networks, satellite communication networks, and terrestrial microwave networks.^[4]

History

Wireless networks

The first professional wireless network was developed under the brand ALOHAnet in 1969 at the University of Hawaii and became operational in June 1971. The first commercial wireless network was the WaveLAN product family, developed by NCR in 1986.

1973 – Ethernet 802.3
1991 – 2G cell phone network
June 1997 – 802.11 "Wi-Fi" protocol first release
1999 – 803.11 VoIP integration

Underlying technology

Advances in MOSFET (MOS transistor) wireless technology enabled the development of digital wireless networks. The wide adoption of RF CMOS (radio frequency CMOS), power MOSFET and LDMOS (lateral diffused MOS) devices led to the development and proliferation of digital wireless networks by the 1990s, with further advances in MOSFET technology leading to increasing bandwidth in the 2000s (Edholm's law).^[5]^[6]^[7] Most of the essential elements of wireless networks are built from MOSFETs, including the mobile transceivers, base station modules, routers, RF power amplifiers,^[6] telecommunication circuits,^[8] RF circuits, and radio transceivers,^[7] in networks such as 2G, 3G,^[5] and 4G.^[6]

Wireless links

Terrestrial microwave – Terrestrial microwave communication uses Earth-based transmitters and receivers resembling satellite dishes. Terrestrial microwaves are in the low gigahertz range, which limits all communications to line-of-sight. Relay stations are spaced approximately 48 km (30 mi) apart.
Communications satellites – Satellites communicate via microwave radio waves, which are not deflected by the Earth's atmosphere. The satellites are stationed in space, typically in geosynchronous orbit 35,400 km (22,000 mi) above the equator. These Earth-orbiting systems are capable of receiving and relaying voice, data, and TV signals.
Cellular and PCS systems use several radio communications technologies. The systems divide the region covered into multiple geographic areas. Each area has a low-power transmitter or radio relay antenna device to relay calls from one area to the next area.
Radio and spread spectrum technologies – Wireless local area networks use a high-frequency radio technology similar to digital cellular and a low-frequency radio technology. Wireless LANs use spread spectrum technology to enable communication between multiple devices in a limited area. IEEE 802.11 defines a common flavor of open-standards wireless radio-wave technology known as Wi-Fi.
Free-space optical communication uses visible or invisible light for communications. In most cases, line-of-sight propagation is used, which limits the physical positioning of communicating devices.

Types of wireless networks

Wireless PAN

Wireless personal area networks (WPANs) connect devices within a relatively small area, that is generally within a person's reach.^[9] For example, both Bluetooth radio and invisible infrared light provides a WPAN for interconnecting a headset to a laptop. Zigbee also supports WPAN applications.^[10] Wi-Fi PANs are becoming commonplace (2010) as equipment designers start to integrate Wi-Fi into a variety of consumer electronic devices. Intel "My WiFi" and Windows 7 "virtual Wi-Fi" capabilities have made Wi-Fi PANs simpler and easier to set up and configure.^[11]

Wireless LAN

A wireless local area network (WLAN) links two or more devices over a short distance using a wireless distribution method, usually providing a connection through an access point for internet access. The use of spread-spectrum or OFDM technologies may allow users to move around within a local coverage area, and still remain connected to the network.

Products using the IEEE 802.11 WLAN standards are marketed under the Wi-Fi brand name. Fixed wireless technology implements point-to-point links between computers or networks at two distant locations, often using dedicated microwave or modulated laser light beams over line of sight paths. It is often used in cities to connect networks in two or more buildings without installing a wired link. To connect to Wi-Fi using a mobile device, one can use a device like a wireless router or the private hotspot capability of another mobile device.

Wireless ad hoc network

A wireless ad hoc network, also known as a wireless mesh network or mobile ad hoc network (MANET), is a wireless network made up of radio nodes organized in a mesh topology. Each node forwards messages on behalf of the other nodes and each node performs routing.^[12] Ad hoc networks can "self-heal", automatically re-routing around a node that has lost power. Various network layer protocols are needed to realize ad hoc mobile networks, such as Distance Sequenced Distance Vector routing, Associativity-Based Routing, Ad hoc on-demand distance-vector routing, and Dynamic Source Routing.

Wireless MAN

Wireless metropolitan area networks are a type of wireless network that connects several wireless LANs.

WiMAX is a type of Wireless MAN and is described by the IEEE 802.16 standard.^[13]

Wireless WAN

Wireless wide area networks are wireless networks that typically cover large areas, such as between neighbouring towns and cities, or city and suburb. These networks can be used to connect branch offices of business or as a public Internet access system. The wireless connections between access points are usually point to point microwave links using parabolic dishes on the 2.4 GHz and 5.8 GHz band, rather than omnidirectional antennas used with smaller networks. A typical system contains base station gateways, access points and wireless bridging relays. Other configurations are mesh systems where each access point acts as a relay also. When combined with renewable energy systems such as photovoltaic solar panels or wind systems they can be stand alone systems.

Cellular network

A cellular network or mobile network is a radio network distributed over land areas called cells, each served by at least one fixed-location transceiver, known as a cell site or base station. In a cellular network, each cell characteristically uses a different set of radio frequencies from all their immediate neighbouring cells to avoid any interference.

When joined these cells provide radio coverage over a wide geographic area. This enables a large number of portable transceivers (e.g., mobile phones, pagers, etc.) to communicate with each other and with fixed transceivers and telephones anywhere in the network, via base stations, even if some of the transceivers are moving through more than one cell during transmission.

Although originally intended for cell phones, with the development of smartphones, cellular telephone networks routinely carry data in addition to telephone conversations:

Global System for Mobile Communications (GSM): The GSM network is divided into three major systems: the switching system, the base station system, and the operation and support system. The cell phone connects to the base system station which then connects to the operation and support station; it then connects to the switching station where the call is transferred to where it needs to go. GSM is the most common standard and is used for a majority of cell phones.^[14]
Personal Communications Service (PCS): PCS is a radio band that can be used by mobile phones in North America and South Asia. Sprint happened to be the first service to set up a PCS.
D-AMPS: Digital Advanced Mobile Phone Service, an upgraded version of AMPS, is being phased out due to advancement in technology. The newer GSM networks are replacing the older system.

Private LTE/5G networks

Private LTE/5G networks use licensed, shared or unlicensed wireless spectrum thanks to LTE or 5G cellular network base stations, small cells and other radio access network (RAN) infrastructure to transmit voice and data to edge devices (smartphones, embedded modules, routers and gateways.

3GPP defines 5G private networks as non-public networks that typically employ a smaller-scale deployment to meet an organization's needs for reliability, accessibility, and maintainability.

Open Source

Open source private networks are based on a collaborative, community-driven software that relies on peer review and production to use, modify and share the source code.

Global area network

A global area network (GAN) is a network used for supporting mobile across an arbitrary number of wireless LANs, satellite coverage areas, etc. The key challenge in mobile communications is handing off user communications from one local coverage area to the next. In IEEE Project 802, this involves a succession of terrestrial wireless LANs.^[15]

Space network

Space networks are networks used for communication between spacecraft, usually in the vicinity of the Earth. The example of this is NASA's Space Network.

Uses

Some examples of usage include cellular phones which are part of everyday wireless networks, allowing easy personal communications. Another example, Intercontinental network systems, use radio satellites to communicate across the world. Emergency services such as the police utilize wireless networks to communicate effectively as well. Individuals and businesses use wireless networks to send and share data rapidly, whether it be in a small office building or across the world.

Properties

General

In a general sense, wireless networks offer a vast variety of uses by both business and home users.^[16]

"Now, the industry accepts a handful of different wireless technologies. Each wireless technology is defined by a standard that describes unique functions at both the Physical and the Data Link layers of the OSI model. These standards differ in their specified signaling methods, geographic ranges, and frequency usages, among other things. Such differences can make certain technologies better suited to home networks and others better suited to network larger organizations."^[16]

Performance

Each standard varies in geographical range, thus making one standard more ideal than the next depending on what it is one is trying to accomplish with a wireless network.^[16] The performance of wireless networks satisfies a variety of applications such as voice and video. The use of this technology also gives room for expansions, such as from 2G to 3G and, 4G and 5G technologies, which stand for the fourth and fifth generation of cell phone mobile communications standards. As wireless networking has become commonplace, sophistication increases through configuration of network hardware and software, and greater capacity to send and receive larger amounts of data, faster, is achieved. Now the wireless network has been running on LTE, which is a 4G mobile communication standard. Users of an LTE network should have data speeds that are 10x faster than a 3G network.^[17]

Space

Space is another characteristic of wireless networking. Wireless networks offer many advantages when it comes to difficult-to-wire areas trying to communicate such as across a street or river, a warehouse on the other side of the premises or buildings that are physically separated but operate as one.^[17] Wireless networks allow for users to designate a certain space which the network will be able to communicate with other devices through that network.

Space is also created in homes as a result of eliminating clutters of wiring.^[18] This technology allows for an alternative to installing physical network mediums such as TPs, coaxes, or fiber-optics, which can also be expensive.

Home

For homeowners, wireless technology is an effective option compared to Ethernet for sharing printers, scanners, and high-speed Internet connections. WLANs help save the cost of installation of cable mediums, save time from physical installation, and also creates mobility for devices connected to the network.^[18] Wireless networks are simple and require as few as one single wireless access point connected directly to the Internet via a router.^[16]

Wireless network elements

The telecommunications network at the physical layer also consists of many interconnected wireline network elements (NEs). These NEs can be stand-alone systems or products that are either supplied by a single manufacturer or are assembled by the service provider (user) or system integrator with parts from several different manufacturers.

Wireless NEs are the products and devices used by a wireless carrier to provide support for the backhaul network as well as a mobile switching center (MSC).

Reliable wireless service depends on the network elements at the physical layer to be protected against all operational environments and applications (see GR-3171, Generic Requirements for Network Elements Used in Wireless Networks – Physical Layer Criteria).^[19]

What are especially important are the NEs that are located on the cell tower to the base station (BS) cabinet. The attachment hardware and the positioning of the antenna and associated closures and cables are required to have adequate strength, robustness, corrosion resistance, and resistance against wind, storms, icing, and other weather conditions. Requirements for individual components, such as hardware, cables, connectors, and closures, shall take into consideration the structure to which they are attached.

Difficulties

Interference

Compared to wired systems, wireless networks are frequently subject to electromagnetic interference. This can be caused by other networks or other types of equipment that generate radio waves that are within, or close, to the radio bands used for communication. Interference can degrade the signal or cause the system to fail.^[4]

Absorption and reflection

Some materials cause absorption of electromagnetic waves, preventing it from reaching the receiver, in other cases, particularly with metallic or conductive materials reflection occurs. This can cause dead zones where no reception is available. Aluminium foiled thermal isolation in modern homes can easily reduce indoor mobile signals by 10 dB frequently leading to complaints about the bad reception of long-distance rural cell signals.

Multipath fading

In multipath fading two or more different routes taken by the signal, due to reflections, can cause the signal to cancel out each other at certain locations, and to be stronger in other places (upfade).

Hidden node problem

The hidden node problem occurs in some types of network when a node is visible from a wireless access point (AP), but not from other nodes communicating with that AP. This leads to difficulties in medium access control (collisions).

Exposed terminal node problem

The exposed terminal problem is when a node on one network is unable to send because of co-channel interference from a node that is on a different network.

Shared resource problem

The wireless spectrum is a limited resource and shared by all nodes in the range of its transmitters. Bandwidth allocation becomes complex with multiple participating users. Often users are not aware that advertised numbers (e.g., for IEEE 802.11 equipment or LTE networks) are not their capacity, but shared with all other users and thus the individual user rate is far lower. With increasing demand, the capacity crunch is more and more likely to happen. User-in-the-loop (UIL) may be an alternative solution to ever upgrading to newer technologies for over-provisioning.

Capacity

Channel

Shannon's theorem can describe the maximum data rate of any single wireless link, which relates to the bandwidth in hertz and to the noise on the channel.

One can greatly increase channel capacity by using MIMO techniques, where multiple aerials or multiple frequencies can exploit multiple paths to the receiver to achieve much higher throughput – by a factor of the product of the frequency and aerial diversity at each end.

Under Linux, the Central Regulatory Domain Agent (CRDA) controls the setting of channels.^[20]

Network

The total network bandwidth depends on how dispersive the medium is (more dispersive medium generally has better total bandwidth because it minimises interference), how many frequencies are available, how noisy those frequencies are, how many aerials are used and whether a directional antenna is in use, whether nodes employ power control and so on.

Cellular wireless networks generally have good capacity, due to their use of directional aerials, and their ability to reuse radio channels in non-adjacent cells. Additionally, cells can be made very small using low power transmitters this is used in cities to give network capacity that scales linearly with population density.^[4]

Safety

Wireless access points are also often close to humans, but the drop off in power over distance is fast, following the inverse-square law.^[21] The position of the United Kingdom's Health Protection Agency (HPA) is that “...radio frequency (RF) exposures from WiFi are likely to be lower than those from mobile phones". It also saw “...no reason why schools and others should not use WiFi equipment".^[22] In October 2007, the HPA launched a new "systematic" study into the effects of WiFi networks on behalf of the UK government, in order to calm fears that had appeared in the media in a recent period up to that time".^[23] Dr Michael Clark, of the HPA, says published research on mobile phones and masts does not add up to an indictment of WiFi.^[24]

References

^ "A New Clusterings Algorithm for Wireless Sensor Networks".
^ "Overview of Wireless Communications". cambridge.org. Retrieved 8 February 2008.
^ "Getting to Know Wireless Networks and Technology". informit.com. Retrieved 8 February 2008.
^ ^a ^b ^c Miao, Guowang; Zander, Jens; Sung, Ki Won; Slimane, Ben (2016). Fundamentals of Mobile Data Networks. Cambridge University Press. ISBN 978-1107143210.
^ ^a ^b Baliga, B. Jayant (2005). Silicon RF Power MOSFETS. World Scientific. ISBN 9789812561213.
^ ^a ^b ^c Asif, Saad (2018). 5G Mobile Communications: Concepts and Technologies. CRC Press. pp. 128–134. ISBN 9780429881343.
^ ^a ^b O'Neill, A. (2008). "Asad Abidi Recognized for Work in RF-CMOS". IEEE Solid-State Circuits Society Newsletter. 13 (1): 57–58. doi:10.1109/N-SSC.2008.4785694. ISSN 1098-4232.
^ Colinge, Jean-Pierre; Greer, James C. (2016). Nanowire Transistors: Physics of Devices and Materials in One Dimension. Cambridge University Press. p. 2. ISBN 9781107052406.
^ "Will 5G kill human".
^ "Wireless Network Industry Report". Archived from the original on 29 October 2008. Retrieved 8 July 2008.
^ "Wi-Fi Personal Area Networks get a boost with Windows 7 and Intel My WiFi". Archived from the original on 30 April 2010. Retrieved 27 April 2010.
^ Yu, Jiguo; Wang, Nannan; Wang, Guanghui; Yu, Dongxiao (1 January 2013). "Connected dominating sets in wireless ad hoc and sensor networks – A comprehensive survey". Computer Communications. 36 (2): 121–134. doi:10.1016/j.comcom.2012.10.005.
^ "Facts About WiMAX And Why Is It "The Future of Wireless Broadband"". 20 June 2009.
^ "GSM World statistics". GSM Association. 2010. Archived from the original on 19 July 2011. Retrieved 16 March 2011.
^ "Mobile Broadband Wireless connections (MBWA)". Retrieved 12 November 2011.
^ ^a ^b ^c ^d Dean Tamara (2010). Network+ Guide to Networks (5th ed.). Boston: Cengage Learning. ISBN 978-1-4239-0245-4.
^ ^a ^b "Wireless LAN Technologies". Source Daddy website. Retrieved 29 August 2011.
^ ^a ^b "WLAN Benefits". Wireless Center commercial web site. Archived from the original on 2 September 2011. Retrieved 29 August 2011.
^ "Generic Requirements for Network Elements Used in Wireless Networks – Physical Layer Criteria". Ericsson.
^ Anadiotis, Angelos-Christos; et al. (2010). "Towards Maximising Wireless Testbed Utilization Using Spectrum Slicing". In Thomas Magedanz; Athanasius Gavras; Huu Thanh Nguyen; Jeffrey S. Chase (eds.). Testbeds and Research Infrastructures, Development of Networks and Communities: 6th International ICST Conference, TridentCom 2010, Berlin, Germany, May 18–20, 2010, Revised Selected Papers. 6th International ICST Conference, TridentCom 2010, Berlin, Germany, May 18–20, 2010. Vol. 46. Springer Science & Business Media. p. 302. ISBN 9783642178504. Retrieved 19 July 2015. […] Central Regulatory Domain Agent (CRDA) […] controls the channels to be set on the system, based on the regulations of each country.
^ Foster, Kenneth R (March 2007). "Radiofrequency exposure from wireless LANs utilizing Wi-Fi technology". Health Physics. 92 (3): 280–289. doi:10.1097/01.HP.0000248117.74843.34. PMID 17293700. S2CID 22839684.
^ "WiFi". Health Protection Agency. 26 October 2009. Archived from the original on 24 December 2009. Retrieved 27 December 2009.
^ "Health Protection Agency announces further research into use of WiFi". Health Protection Agency. Archived from the original on 17 June 2008. Retrieved 28 August 2008.
^ Daniels, Nicki (11 December 2006). "Wi-fi: should we be worried?". The Times. London. Retrieved 16 September 2007. All the expert reviews done here and abroad indicate that there is unlikely to be a health risk from wireless networks. … When we have conducted measurements in schools, typical exposures from WiFi are around 20 millionths of the international guideline levels of exposure to radiation. As a comparison, a child on a mobile phone receives up to 50 percent of guideline levels. So a year sitting in a classroom near a wireless network is roughly equivalent to 20 minutes on a mobile. If WiFi should be taken out of schools, then the mobile phone network should be shut down, too—and FM radio and TV, as the strength of their signals is similar to that from WiFi in classrooms....^{[dead link]}

External links

[1] "A New Clusterings Algorithm for Wireless Sensor Networks".

[2] "Overview of Wireless Communications". cambridge.org. Retrieved 8 February 2008.

[3] "Getting to Know Wireless Networks and Technology". informit.com. Retrieved 8 February 2008.

[Zander-4] Miao, Guowang; Zander, Jens; Sung, Ki Won; Slimane, Ben (2016). Fundamentals of Mobile Data Networks. Cambridge University Press. ISBN 978-1107143210.

[Baliga-5] Baliga, B. Jayant (2005). Silicon RF Power MOSFETS. World Scientific. ISBN 9789812561213.

[Asif-6] Asif, Saad (2018). 5G Mobile Communications: Concepts and Technologies. CRC Press. pp. 128–134. ISBN 9780429881343.

[O'Neill-7] O'Neill, A. (2008). "Asad Abidi Recognized for Work in RF-CMOS". IEEE Solid-State Circuits Society Newsletter. 13 (1): 57–58. doi:10.1109/N-SSC.2008.4785694. ISSN 1098-4232.

[Colinge2016-8] Colinge, Jean-Pierre; Greer, James C. (2016). Nanowire Transistors: Physics of Devices and Materials in One Dimension. Cambridge University Press. p. 2. ISBN 9781107052406.

[9] "Will 5G kill human".

[10] "Wireless Network Industry Report". Archived from the original on 29 October 2008. Retrieved 8 July 2008.

[11] "Wi-Fi Personal Area Networks get a boost with Windows 7 and Intel My WiFi". Archived from the original on 30 April 2010. Retrieved 27 April 2010.

[12] Yu, Jiguo; Wang, Nannan; Wang, Guanghui; Yu, Dongxiao (1 January 2013). "Connected dominating sets in wireless ad hoc and sensor networks – A comprehensive survey". Computer Communications. 36 (2): 121–134. doi:10.1016/j.comcom.2012.10.005.

[13] "Facts About WiMAX And Why Is It "The Future of Wireless Broadband"". 20 June 2009.

[14] "GSM World statistics". GSM Association. 2010. Archived from the original on 19 July 2011. Retrieved 16 March 2011.

[15] "Mobile Broadband Wireless connections (MBWA)". Retrieved 12 November 2011.

[dean-16] Dean Tamara (2010). Network+ Guide to Networks (5th ed.). Boston: Cengage Learning. ISBN 978-1-4239-0245-4.

[daddy-17] "Wireless LAN Technologies". Source Daddy website. Retrieved 29 August 2011.

[center-18] "WLAN Benefits". Wireless Center commercial web site. Archived from the original on 2 September 2011. Retrieved 29 August 2011.

[wireless-19] "Generic Requirements for Network Elements Used in Wireless Networks – Physical Layer Criteria". Ericsson.

[20] Anadiotis, Angelos-Christos; et al. (2010). "Towards Maximising Wireless Testbed Utilization Using Spectrum Slicing". In Thomas Magedanz; Athanasius Gavras; Huu Thanh Nguyen; Jeffrey S. Chase (eds.). Testbeds and Research Infrastructures, Development of Networks and Communities: 6th International ICST Conference, TridentCom 2010, Berlin, Germany, May 18–20, 2010, Revised Selected Papers. 6th International ICST Conference, TridentCom 2010, Berlin, Germany, May 18–20, 2010. Vol. 46. Springer Science & Business Media. p. 302. ISBN 9783642178504. Retrieved 19 July 2015. […] Central Regulatory Domain Agent (CRDA) […] controls the channels to be set on the system, based on the regulations of each country.

[Foster2007-21] Foster, Kenneth R (March 2007). "Radiofrequency exposure from wireless LANs utilizing Wi-Fi technology". Health Physics. 92 (3): 280–289. doi:10.1097/01.HP.0000248117.74843.34. PMID 17293700. S2CID 22839684.

[HPAWiFi-22] "WiFi". Health Protection Agency. 26 October 2009. Archived from the original on 24 December 2009. Retrieved 27 December 2009.

[HPAWiFiStudy-23] "Health Protection Agency announces further research into use of WiFi". Health Protection Agency. Archived from the original on 17 June 2008. Retrieved 28 August 2008.

[24] Daniels, Nicki (11 December 2006). "Wi-fi: should we be worried?". The Times. London. Retrieved 16 September 2007. All the expert reviews done here and abroad indicate that there is unlikely to be a health risk from wireless networks. … When we have conducted measurements in schools, typical exposures from WiFi are around 20 millionths of the international guideline levels of exposure to radiation. As a comparison, a child on a mobile phone receives up to 50 percent of guideline levels. So a year sitting in a classroom near a wireless network is roughly equivalent to 20 minutes on a mobile. If WiFi should be taken out of schools, then the mobile phone network should be shut down, too—and FM radio and TV, as the strength of their signals is similar to that from WiFi in classrooms....^{[dead link]}

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

v t e Telecommunications
History	Beacon Broadcasting Cable protection system Cable TV Communications satellite Computer network Data compression audio DCT image video Digital media Internet video online video platform social media streaming Drums Edholm's law Electrical telegraph Fax Heliographs Hydraulic telegraph Information Age Information revolution Internet Mass media Mobile phone Smartphone Optical telecommunication Optical telegraphy Pager Photophone Prepaid mobile phone Radio Radiotelephone Satellite communications Semaphore Phryctoria Semiconductor device MOSFET transistor Smoke signals Telecommunications history Telautograph Telegraphy Teleprinter (teletype) Telephone The Telephone Cases Television digital streaming Undersea telegraph line Videotelephony Whistled language Wireless revolution
Pioneers	Nasir Ahmed Edwin Howard Armstrong Mohamed M. Atalla John Logie Baird Paul Baran John Bardeen Alexander Graham Bell Emile Berliner Tim Berners-Lee Francis Blake Jagadish Chandra Bose Charles Bourseul Walter Houser Brattain Vint Cerf Claude Chappe Yogen Dalal Daniel Davis Jr. Donald Davies Amos Dolbear Thomas Edison Lee de Forest Philo Farnsworth Reginald Fessenden Elisha Gray Oliver Heaviside Robert Hooke Erna Schneider Hoover Harold Hopkins Gardiner Greene Hubbard Internet pioneers Bob Kahn Dawon Kahng Charles K. Kao Narinder Singh Kapany Hedy Lamarr Roberto Landell de Moura Innocenzo Manzetti Guglielmo Marconi Robert Metcalfe Antonio Meucci Samuel Morse Jun-ichi Nishizawa Charles Grafton Page Radia Perlman Alexander Stepanovich Popov Tivadar Puskás Johann Philipp Reis Claude Shannon Almon Brown Strowger Henry Sutton Charles Sumner Tainter Nikola Tesla Camille Tissot Alfred Vail Thomas A. Watson Charles Wheatstone Vladimir K. Zworykin
Transmission media	Coaxial cable Fiber-optic communication optical fiber Free-space optical communication Molecular communication Radio waves wireless Transmission line telecommunication circuit
Network topology and switching	Bandwidth Links Nodes terminal Network switching circuit packet Telephone exchange
Multiplexing	Space-division Frequency-division Time-division Polarization-division Orbital angular-momentum Code-division
Concepts	Communication protocol Computer network Data transmission Store and forward Telecommunications equipment
Types of network	Cellular network Ethernet ISDN LAN Mobile NGN Public Switched Telephone Radio Television Telex UUCP WAN Wireless network
Notable networks	ARPANET BITNET CYCLADES FidoNet Internet Internet2 JANET NPL network Toasternet Usenet
Locations	Africa Americas North South Antarctica Asia Europe Oceania (Global telecommunications regulation bodies)
Telecommunication portal Category Outline Commons