ISO/IEC 15693
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
ISO/IEC 15693, is an ISO/IEC standard for vicinity cards, i.e. cards which can be read from a greater distance as compared with proximity cards. Such cards can normally be read out by a reader without being powered themselves, as the reader will supply the necessary power to the card over the air (wireless).
ISO/IEC 15693 systems operate at the 13.56 MHz frequency, and offer maximum read distance of 1–1.5 meters. As the vicinity cards have to operate at a greater distance, the necessary magnetic field is less (0.15 to 5 A/m) than that for a proximity card (1.5 to 7.5 A/m).
Example applications
[edit]- Ski pass: each of those has a unique ID and the system knows for how long the pass is valid etc.
Communication to the card
[edit]Communication from the reader to the card uses an amplitude-shift keying with 10% or 100% modulation index.
The data coding is:
- 1 out of 4 pulse-position modulation
- 2 bits are coded as the position of a 9.44 μs pause in a 75.52 μs symbol time, giving a bit rate of 26.48 kilobits per second. The least-significant bits are sent first.
- 1 out of 256 pulse-position modulation
- 8 bits are coded as the position of a 9.44 μs pause in a 4.833 ms symbol time, giving a bit rate of 1.65 kbit/s.
Communication to the reader
[edit]The card has two ways to send its data back to the reader. Both use a subcarrier transmitted back to the reader using load modulation.
Amplitude-shift keying
[edit]Amplitude-shift keying 100% modulation index on a 423.75 kHz subcarrier. The data rate can be:
- Low 6.62 kbit/s (fc/2048)
- High 26.48 kbit/s (fc/512)
A logic 0 starts with eight pulses of 423.75 kHz followed by an unmodulated time of 18.88 μs (256/ fc); a logic 1 is the other way round. The data frame delimiters are code violations, a start of frame is:
- an unmodulated time of 56.64 μs (768/ fc),
- 24 pulses of 423.75 kHz
- a logic 1
and the end of a frame is:
- a logic 0
- 24 pulses of 423.75 kHz
- an unmodulated time of 56.64 μs
The data are sent using a Manchester code.
Frequency-shift keying
[edit]Frequency-shift keying by switching between a 423.75 kHz sub carrier (operating frequency divided by 32) and a 484.25 kHz sub carrier (operating frequency divided by 28). The data rate can be:
- Low 6.67 kbit/s (fc/2032)
- High 26.69 kbit/s (fc/508)
A logic 0 starts with eight pulses of 423.75 kHz followed by nine pulses of 484.28 kHz; a logic 1 is the other way round. The data frame delimiters are code violations, a start of frame is:
- 27 pulses of 484.28 kHz
- 24 pulses of 423.75 kHz
- a logic 1
and the end of a frame is:
- a logic 0
- 24 pulses of 423.75 kHz
- 27 pulses of 484.28 kHz
The data are sent using a Manchester code.
Manufacturer codes
[edit]This section may require cleanup to meet Wikipedia's quality standards. The specific problem is: incorrect links to existing articles. (November 2024) |
see ISO/IEC 7816-6
- Code 0x01: Motorola (UK)
- Code 0x02: STMicroelectronics SA (FR)
- Code 0x03: Hitachi Ltd (JP)
- Code 0x04: NXP Semiconductors (DE)
- Code 0x05: Infineon Technologies AG (DE)
- Code 0x06: Cylink (US)
- Code 0x07: Texas Instruments (FR)
- Code 0x08: Fujitsu Limited (JP)
- Code 0x09: Matsushita Electronics Corporation, Semiconductor Company (JP)
- Code 0x0A: NEC (JP)
- Code 0x0B: Oki Electric Industry Co Ltd (JP)
- Code 0x0C: Toshiba Corp (JP)
- Code 0x0D: Mitsubishi Electric Corp (JP)
- Code 0x0E: Samsung Electronics Co Ltd (KR)
- Code 0x0F: Hynix (KR)
- Code 0x10: LG-Semiconductors Co Ltd (KR)
- Code 0x11: Emosyn-EM Microelectronics (US)
- Code 0x12: INSIDE Technology (FR)
- Code 0x13: ORGA Kartensysteme GmbH (DE)
- Code 0x14: Sharp Corporation (JP)
- Code 0x15: ATMEL (FR)
- Code 0x16: EM Microelectronic-Marin (CH)
- Code 0x17: SMARTRAC TECHNOLOGY GmbH (DE)
- Code 0x18: ZMD AG (DE)
- Code 0x19: XICOR Inc (US)
- Code 0x1A: Sony Corporation (JP)
- Code 0x1B: Malaysia Microelectronic Solutions Sdn Bhd (MY)
- Code 0x1C: Emosyn (US)
- Code 0x1D: Shanghai Fudan Microelectronics Co Ltd (CN)
- Code 0x1E: Magellan Technology Pty Limited (AU)
- Code 0x1F: Melexis NV BO (CH)
- Code 0x20: Renesas Technology Corp (JP)
- Code 0x21: TAGSYS (FR)
- Code 0x22: Transcore (US)
- Code 0x23: Shanghai Belling Corp Ltd (CN)
- Code 0x24: Masktech Germany GmbH (DE)
- Code 0x25: Innovision Research and Technology Plc (UK)
- Code 0x26: Hitachi ULSI Systems Co Ltd (JP)
- Code 0x27: Yubico AB (SE)
- Code 0x28: Ricoh (JP)
- Code 0x29: ASK (FR)
- Code 0x2A: Unicore Microsystems LLC (RU)
- Code 0x2B: Dallas semiconductor/Maxim (US)
- Code 0x2C: Impinj Inc (US)
- Code 0x2D: RightPlug Alliance (US)
- Code 0x2E: Broadcom Corporation (US)
- Code 0x2F: MStar Semiconductor Inc (TW)
- Code 0x30: BeeDar Technology Inc (US)
- Code 0x31: RFIDsec (DK)
- Code 0x32: Schweizer Electronic AG (DE)
- Code 0x33: AMIC Technology Corp (TW)
- Code 0x34: Mikron JSC (RU)
- Code 0x35: Fraunhofer Institute for Photonic Microsystems (DE)
- Code 0x36: IDS Microship AG (CH)
- Code 0x37: Kovio (US)
- Code 0x38: HMT Microelectronic Ltd (CH)
- Code 0x39: Silicon Craft Technology (TH)
- Code 0x3A: Advanced Film Device Inc. (JP)
- Code 0x3B: Nitecrest Ltd (UK)
- Code 0x3C: Verayo Inc. (US)
- Code 0x3D: HID Global (US)
- Code 0x3E: Productivity Engineering Gmbh (DE)
- Code 0x3F: Austriamicrosystems AG (reserved) (AT)
- Code 0x40: Gemalto SA (FR)
- Code 0x41: Renesas Electronics Corporation (JP)
- Code 0x42: 3Alogics Inc (KR)
- Code 0x43: Top TroniQ Asia Limited (Hong Kong)
- Code 0x44: Gentag Inc (USA)
- Code 0x45: Invengo Information Technology Co.Ltd (CN)
- Code 0x46: Guangzhou Sysur Microelectronics, Inc (CN)
- Code 0x47: CEITEC S.A. (BR)
- Code 0x48: Shanghai Quanray Electronics Co. Ltd. (CN)
- Code 0x49: MediaTek Inc (TW)
- Code 0x4A: Angstrem PJSC (RU)
- Code 0x4B: Celisic Semiconductor (Hong Kong) Limited (CN)
- Code 0x4C: LEGIC Identsystems AG (CH)
- Code 0x4D: Balluff GmbH (DE)
- Code 0x4E: Oberthur Technologies (FR)
- Code 0x4F: Silterra Malaysia Sdn. Bhd. (MY)
- Code 0x50: DELTA Danish Electronics, Light & Acoustics (DK)
- Code 0x51: Giesecke & Devrient GmbH (DE)
- Code 0x52: Shenzhen China Vision Microelectronics Co., Ltd. (CN)
- Code 0x53: Shanghai Feiju Microelectronics Co. Ltd. (CN)
- Code 0x54: Intel Corporation (US)
- Code 0x55: Microsensys GmbH (DE)
- Code 0x56: Sonix Technology Co., Ltd. (TW)
- Code 0x57: Qualcomm Technologies Inc (US)
- Code 0x58: Realtek Semiconductor Corp (TW)
- Code 0x59: Freevision Technologies Co. Ltd (CN)
- Code 0x5A: Giantec Semiconductor Inc. (CN)
- Code 0x5B: JSC Angstrem-T (RU)
- Code 0x5C: STARCHIP France
- Code 0x5D: SPIRTECH (FR)
- Code 0x5E: GANTNER Electronic GmbH (AT)
- Code 0x5F: Nordic Semiconductor (NO)
- Code 0x60: Verisiti Inc (US)
- Code 0x61: Wearlinks Technology Inc. (CN)
- Code 0x62: Userstar Information Systems Co., Ltd (TW)
- Code 0x63: Pragmatic Semiconductor Ltd. (UK)
- Code 0x64: Associação do Laboratório de Sistemas Integráveis Tecnológico – LSI-TEC (BR)
- Code 0x65: Tendyron Corporation (CN)
- Code 0x66: MUTO Smart Co., Ltd.(KR)
- Code 0x67: ON Semiconductor (US)
- Code 0x68: TÜBİTAK BİLGEM (TR)
- Code 0x69: Huada Semiconductor Co., Ltd (CN)
- Code 0x6A: SEVENEY (FR)
- Code 0x6B: ISSM (FR)
- Code 0x6C: Wisesec Ltd (IL)
- Code 0x7E: Holtek (TW)
Implementations
[edit]The first byte of the UID should always be 0xE0.
Products with ISO/IEC 15693 interface
[edit]- EEPROM: various manufacturers like ST Microelectronics or NXP offer EEPROMs readable via ISO/IEC 15693.
- μController: Texas Instruments offers a small μController entirely powered by the ISO/IEC 15693 reading field and capable of reading a simple temperature sensor, wirelessly providing the value of that to the reader.
External links
[edit]- ISO/IEC 15693-1:2010 Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 1: Physical characteristics
- ISO/IEC 15693-2:2006 Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 2: Air interface and initialization
- ISO/IEC 15693-3:2009 Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol